Assessment on ultimate load of Cold-formed steel channel (CFSC) stub column

QR Code

Assessment on ultimate load of Cold-formed steel channel (CFSC) stub column

Cold-formed steel is used as the non-structural and structural material in civil engineering work and building. Cold-formed steel channel is selected and cut into 100 mm, 200 mm, 300 mm, 400 mm and 500 mm. The slenderness ratio is calculated and noted as a stub or short column because below 40. The...

Full description

Bibliographic Details
Published in:	MATEC Web of Conferences
Main Author:	Sani M.S.H.M.; Muftah F.; Muda M.F.; Tan C.S.
Format:	Conference paper
Language:	English
Published:	EDP Sciences 2015
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-84976406312&doi=10.1051%2fmatecconf%2f20152701008&partnerID=40&md5=1967c080e7e76345acc71328ee0f2f35

Similar Items

Preliminary Study on Built-Up Back-To-Back Cold-Formed Steel Stub Column Filled with Washed Bottom Ash Concrete
by: Muftah F.; Sani M.S.H.M.; Nindyawati N.
Published: (2024)

Structural behaviour of cold-formed cut-curved channel steel section under compression
by: Sani M.S.H.M.; Muftah F.; Tan C.S.; Tahir M.M.
Published: (2015)

Testing and analysis of cold-formed steel channel section with notch
by: Sani M.S.H.M.; Muftah F.; Ismail M.I.
Published: (2018)

Experimental investigation on box-up cold-formed steel columns in fire
by: Muftah F.; Sani M.S.H.M.; Osman A.R.; Mohammad S.; Ngian S.P.
Published: (2018)

Numerical investigation of cold-formed steel channel columns subjected to axial thrust
by: Zain M.R.M.; Wee L.S.; Rosli M.I.F.; Hamid H.A.
Published: (2010)

Temperature rise of cold-formed steel built-up back-to-back column under standard fire
by: Muftah F.; Mohd Sani M.S.H.; Mohammad S.; Poi Ngian S.; Md Tahir M.
Published: (2016)

Strengthening method and structural performance of cold-formed cut-curved steel under compression
by: Mohd Sani M.S.H.; Muftah F.; Siang Tan C.; Md Tahir M.
Published: (2016)

Behaviour and design of eccentrically loaded hot-rolled steel SHS and RHS stub columns at elevated temperatures
by: Yun X.; Saari N.; Gardner L.
Published: (2020)

Investigation of Tensile Test on Back-to-Back Web Connection of Cold-Formed Steel C-Section
by: Muhammad Alif I.R.; Kamarudin A.F.; Seyed Hakim S.J.; Musa M.K.; Hamid S.; Mohammadhasani M.; Rathomy Romeli M.A.
Published: (2024)

Review on column fire resistance design for concrete filled steel tube
by: Kado B.; Mohammad S.; Lee Y.H.; Shek P.N.; Kadir M.A.A.; Muftah F.
Published: (2018)

COMPARATIVE STUDY ON COMPRESSIVE | STRENGTH OF FIBRE-REINFORCED CONCRETE MADE WITH INDUSTRIAL HYBRID FIBRE AND NATURAL WASTE FIBRE
by: Sani M.S.H.M.; Muftah F.; Muda M.F.; Si Ho L.
Published: (2022)

Assessment of ultimate bearing capacity of the pile for jacking & rotary piling method
by: Hassan N.S.; Ibrahim A.; Alias R.; Abang Hasbollah D.Z.; Ramli A.B.
Published: (2023)

Investigation on compressive strength of special concrete made with crushed waste glass
by: Sani M.S.H.M.; Osman A.R.; Muftah F.
Published: (2015)

Frequency shifting of microstrip ring filter using open stubs
by: Zakaria N.Z.; Salleh M.K.Mohd.; Khan Z.I.; Wahab N.Ab.; Awang Z.
Published: (2010)

Production of Washed Bottom Ash as Sand Replacement Material in Concrete Paving Block
by: Sani M.S.H.M.; Muftah F.; Kamal M.M.M.; Osman A.R.
Published: (2023)

Liquid-rubber-modified epoxy/clay nanocomposites: effect of dispersion methods on morphology and ultimate properties
by: Vijayan P.P.; Puglia D.; Pionteck J.; Kenny J.M.; Thomas S.
Published: (2015)

Cyclic Behaviour of Beam-Column Joints with Corbels under In-Plane Lateral Loads
by: Kay Dora A.G.; Hamid N.H.; Rozli M.I.F.; Che Nooryohana Z.
Published: (2020)

Mild steel sheet metal forming using abaqus software: Influence of drawbeads in minimize springback
by: Khamis N.A.; Zin S.M.; Bahari A.R.
Published: (2016)

Design and analyses of floating stone columns
by: Ng K.S.; Tan S.A.
Published: (2014)

Acoustic emission signal application on damage evaluation of rc beam-column joint under monotonic loading
by: Md N.N.; Jalilluddin A.M.; Mohamad M.Z.; Mat Saliah S.N.; Ibrahim A.; Abd Ghani K.D.
Published: (2021)

Compact meandered shorted-stub K-band filter using 0.18-μm CMOS process
by: Othman N.; Salleh M.K.M.; Prigent G.
Published: (2017)

Simplified homogenization method in stone column designs
by: Ng K.S.; Tan S.A.
Published: (2015)

Fatigue of notched steel hollow sections under sinusoidal cyclic loading
by: Jaini Z.M.; Sugiura K.; Sato A.; Jamaluddin N.; Badrul Azman M.F.N.; Abdul Kudus S.
Published: (2024)

A preliminary study into the effect of oxide chemistry on the bonding mechanism of cold-sprayed titanium dioxide coatings on SUS316 stainless steel substrate
by: Omar N.I.B.; Mohamed S.B.; Yusuf Y.B.; Rahim T.B.A.; Mustafa Z.B.; Ismail S.B.; Bakar I.A.B.A.; Selvamani S.
Published: (2022)

Comparison of Seismic Response Corner Beam-Column Joint with and without Fuse Bars Under In-Plane Lateral Cyclic Loading
by: Hadi N.D.; Hamid N.H.A.; Azmi I.F.; Hassan R.; Sutopo Y.; Chao B.; Zainuddin N.A.
Published: (2022)

Experimental Analysis of Seismic Responses Interior Beam-Column Joint with and Without Fuse Bars Under In-Plane Lateral Cyclic Loading
by: Abdul Hamid N.H.; Hadi N.D.; Ghani K.D.; Tiong P.L.Y.; Kusumawardani R.; Ibrahim N.
Published: (2024)

Experimental study on seismic behavior of repaired single and double unit tunnel form building under in-plane cyclic loading
by: Anudai S.; Hamid N.H.A.; Hashim M.H.M.
Published: (2016)

Biomimicry of Palm Tree Leaves Form and Pattern on Building Form
by: Agus Salim N.A.; Mydin M.A.O.; Ulang N.H.M.
Published: (2014)

Application of automated grain sizing technique (AGS) for bed load samples at Rasil River: A case study for supply limited channel
by: Sulaiman M.S.; Sinnakaudan S.K.; Ng S.F.; Strom K.
Published: (2014)

Reliability Analysis of Multibridge Channel Field Effect Transistor
by: Ganlin H.; Alias N.E.; Tan M.L.P.; Hamzah M.N.; Wahab Y.A.; Hussin H.
Published: (2024)

Simulation on the Effect of Channel Thickness on the Performance of Multi-Bridge Channel Field-Effect Transistor
by: Xin T.M.; Sultan S.M.; Hussin H.
Published: (2023)

Evaluation of the Behaviour of Steel Bar in the Concrete under Cyclic Loading Using Magnetic Flux Leakage and Acoustic Emission Techniques
by: Md Nor N.; Abdullah S.; Mohamad Halim M.A.H.; Arifin A.
Published: (2023)

Form-Finding Using Nonlinear Analysis Method in Tensioned Fabric Structure in the Form of Handkerchief Surface
by: Wan Ibrahim M.H.; Abdul Hadi M.N.; Min Y.H.
Published: (2018)

Modelling and simulation of multi-vessel batch distillation column
by: Hazwani S.N.; Hisyam A.; Aziz B.A.
Published: (2017)

Numerical study on bearing capacity of single stone column
by: Ng K.S.
Published: (2018)

Numerical Analysis on the Flow Depth Behaviour in Dividing Open-Channel for Trapezoidal and Rectangular Cross-Sectional Channel
by: Harmizi P.N.S.; Zakaria S.A.A.; Zawawi I.S.M.; Haniffah M.R.M.
Published: (2023)

Sheet Metal Forming Analysis of Aluminium Alloy AA6061 using |Altair INSPIRE Form Simulation
by: Tharazi, et al.
Published: (2024)

Mitragynine and its potential blocking effects on specific cardiac potassium channels
by: Tay Y.L.; Teah Y.F.; Chong Y.M.; Jamil M.F.A.; Kollert S.; Adenan M.I.; Wahab H.A.; Döring F.; Wischmeyer E.; Tan M.L.
Published: (2016)

Efficacy of cold fogging of a synergized pyrethroid formulation against Aedes aegypti and Culex quinquefasciatus under simulated field conditions
by: Wan-Norafikah O.; Lee H.L.; Loke S.R.; Andy-Tan W.A.; Chen C.D.
Published: (2016)

Management of COVID-19 vaccines cold chain logistics: a scoping review
by: Fahrni M.L.; Ismail I.A.-N.; Refi D.M.; Almeman A.; Yaakob N.C.; Saman K.M.; Mansor N.F.; Noordin N.; Babar Z.-U.-D.
Published: (2022)