Effects of different chemical additives on biodiesel fuel properties and engine performance. A comparison review

QR Code

Effects of different chemical additives on biodiesel fuel properties and engine performance. A comparison review

Biodiesel fuel can be used as an alternative to mineral diesel, its blend up to 20% used as a commercial fuel for the existing diesel engine in many countries. However, at high blending ratio, the fuel properties are worsening. The feasibility of pure biodiesel and blended fuel at high blending rati...

Full description

Bibliographic Details
Published in:	MATEC Web of Conferences
Main Author:	Ali O.M.; Mamat R.; Abdullah N.R.; Abdullah A.A.; Khoerunnisa F.; Sardjono R.E.
Format:	Conference paper
Language:	English
Published:	EDP Sciences 2016
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-84969760214&doi=10.1051%2fmatecconf%2f20163803002&partnerID=40&md5=16bfeccf63c746bf65271856110d3310

Similar Items

Comparison of the Effect of Different Alcohol Additives with Blended Fuel on Cyclic Variation in Diesel Engine
by: Ali O.M.; Abdullah N.R.; Mamat R.; Abdullah A.A.
Published: (2015)

Commercial and synthesized additives for biodiesel fuel: A review
by: Ali O.M.; Mamat R.; Abdullah N.R.; Abdullah A.A.
Published: (2016)

Investigation of blended palm biodiesel-diesel fuel properties with oxygenated additive
by: Ali O.M.; Mamat R.; Abdullah N.R.; Abdullah A.A.
Published: (2016)

Analysis of blended fuel properties and engine performance with palm biodiesel-diesel blended fuel
by: Ali O.M.; Mamat R.; Abdullah N.R.; Abdullah A.A.
Published: (2015)

Analysis of blended fuel properties and engine cyclic variations with ethanol additive
by: Ali O.M.; Mamat R.; Abdullah N.R.; Abdullah A.A.
Published: (2015)

Characteristic of blended fuel properties and engine cycle-to-cycle variations with butanol additive
by: Ali O.M.; Mamat R.; Abdullah N.R.; Abdullah A.A.
Published: (2015)

Influence of chemical blends on palm oil methyl esters' cold flow properties and fuel characteristics
by: Ali O.M.; Yusaf T.; Mamat R.; Abdullah N.R.; Abdullah A.A.
Published: (2014)

Characteristic of biodiesel fuel derived from palm oil
by: Mamat R.; Rahim R.; Abdullah A.A.; Aziz A.; Abdullah N.R.
Published: (2013)

Synthesis of ethyl levulinate over sulfonated lignin-based carbon catalyst as a fuel additive to biodiesel-diesel blends towards engine emissions
by: Hassan A.H.; Zainol M.M.; Samion M.A.; Azlan M.A.; Asmadi M.; Mohamad Daud A.R.; Saad I.; Mohd Nor Azman N.A.N.
Published: (2023)

Effect of exhaust gas recirculation system and air temperature on exhaust emission of a diesel engine operating with biodiesel
by: Mamat R.; Yusop A.F.; Abdullah A.A.; Aziz A.; Abdullah N.R.
Published: (2013)

Physical Properties of Biodiesel-Diesel Blends with Butyl Levulinate Additive and their Emission Characteristics from Diesel Engine
by: Samion M.A.; Zainol M.M.; qil Azlan M.A.; Asmadi M.; Hassan A.H.; Baharudin L.; Saad I.
Published: (2023)

Emissions of transesterification Jatropha-Palm blended biodiesel
by: Yunus S.; Rashid A.A.; Abdullah N.R.; Mamat R.; Latip S.A.
Published: (2013)

Engine performance and emissions evaluation of surfactant-free B30 biodiesel–diesel/water emulsion as alternative fuel
by: Mohd Tamam M.Q.; Omi M.R.T.; Yahya W.J.; Ithnin A.M.; Abdul Rahman H.; Rahman M.M.; Abd Kadir H.; Noge H.; Koga T.; Hong C.; Otaka T.; Kinoshita E.
Published: (2023)

Effect of addition of plastic pyrolytic oil and waste cooking oil biodiesel in palm oil biodiesel–commercial diesel blends on diesel engine performance, emission, and lubricity
by: Awang M.S.N.; Zulkifli N.W.M.; Abbas M.M.; Zulkifli S.A.; Yusoff M.N.A.M.; Ahmad M.H.; Lokman NolHakim M.A.H.; Wan Daud W.M.A.
Published: (2022)

Performance and Emissions of Diesel Engine with Circulation NonSurfactant Emulsion Fuel System
by: Omi R.T.; Yahya W.J.; Kadir H.A.; Chan A.F.E.; Ithnin A.M.; Abdullah N.R.; Rahman M.M.; Tahir U.
Published: (2021)

Experimental investigation of adding vanes into the air intake runner of a diesel engine run on biodiesel to improve the air-fuel mixing
by: Bari S.; Saad I.
Published: (2015)

The Comparison of Attribute Attainment between Engineering and Non-Engineering Students taking an Engineering Subject
by: Rozli M.I.F.; Rosseli S.R.; Ghani K.D.A.; Abdullah N.H.H.
Published: (2022)

Investigation of intake flow rate and swirl motion of SI engine
by: Suhaimi S.; Mamat R.; Abdullah A.A.; Aziz A.; Abdullah N.R.
Published: (2014)

Biodiesel production from waste cooking oil using homogeneous catalyst
by: Hamed H.H.; Mohammed A.E.; Habeeb O.A.; Ali O.M.; Aljaf O.H.S.; Abdulqader M.A.
Published: (2021)

The effect of different in-line mixing method of water-in-diesel emulsion fuel on the diesel engine performance
by: Mahdi W.N.I.B.W.; Ithnin A.M.B.; Yahya W.J.B.; Rashid M.A.B.A.; Kadir H.B.A.
Published: (2023)

Editorial: Women in chemical engineering
by: Volpatti L.R.; Bernin D.; Bozzano G.; Chuck-Hernandez C.; Shawalliah Idris S.; Mayolo-Deloisa K.
Published: (2023)

Factors Affecting on Process of Synthesizing Biodiesel and Arranging Production Steps: a Review Study
by: Saleh A.M.; Alias A.B.; Ali O.M.; Saleh N.M.
Published: (2023)

Investigation of Dynamic Viscosity and Calorific Value of Algae Biodiesel Blend with n-Butanol Additive
by: Noordin N.H.; Sharudin H.; Yusof A.A.M.; Kasim H.A.; Nizam N.E.M.
Published: (2023)

A Review of the Emulsification Method for Alternative Fuels Used in Diesel Engines
by: Hamid M.F.; Teoh Y.H.; Idroas M.Y.; Mohamed M.; Sa’ad S.; Mat S.C.; Abdullah M.K.; Le T.D.; How H.G.; Nguyen H.T.
Published: (2022)

Methylene blue rejection and antifouling properties of different carbonaceous additives-based polyvinylidene fluoride membrane
by: Mohamat R.; Abu Bakar S.; Mohamed A.; Muqoyyanah; Mohamad Kamal S.N.E.A.; Othman M.H.D.; Rohani R.; Mamat M.H.; Malek M.F.; Ahmad M.K.; Ramakrishna S.
Published: (2023)

Recent advances in heterogeneous catalysts for the synthesis of alkyl levulinate biofuel additives from renewable levulinic acid: A comprehensive review
by: Nelson Appaturi J.; Andas J.; Ma Y.-K.; Lee Phoon B.; Muazu Batagarawa S.; Khoerunnisa F.; Hazwan Hussin M.; Ng E.-P.
Published: (2022)

Hydrogen port fuel injection: Review of fuel injection control strategies to mitigate backfire in internal combustion engine fuelled with hydrogen
by: Khalid A.H.; Muhamad Said M.F.; Veza I.; Abas M.A.; Roslan M.F.; Abubakar S.; Jalal M.R.
Published: (2024)

Hydrogen port fuel injection: Review of fuel injection control strategies to mitigate backfire in internal combustion engine fuelled with hydrogen
by: Khalid, et al.
Published: (2024)

Techno-economic comparison of three biodiesel production scenarios enhanced by glycerol supercritical water reforming process
by: Ziyai M.R.; Mehrpooya M.; Aghbashlo M.; Omid M.; Alsagri A.S.; Tabatabaei M.
Published: (2019)

Enzymatic Transesterification Using Different Immobilized Lipases and its Biodiesel Effect on Gas Emission
by: Mohamad Nor N.F.S.; Veny H.; Hamzah F.; Muhd Rodhi M.N.; Kusumaningtyas R.D.; Prasetiawan H.; Hartanto D.; Sulaiman S.; Sazali R.A.
Published: (2024)

Comparison analysis of hydrogen addition into both anode and afterburner of fuel cell incorporated with hybrid renewable energy driven SOFC: An application of techno-environmental horizon and multi-objective optimization
by: Hai, et al.
Published: (2024)

The role of antioxidants in improving biodiesel's oxidative stability, poor cold flow properties, and the effects of the duo on engine performance: A review
by: Amran N.A.; Bello U.; Hazwan Ruslan M.S.
Published: (2022)

Inorganic metal as additives in SAE 10W-30 Malaysian automotive engine oils
by: Roslan A.; Ibrahem A.S.; Hadi A.
Published: (2014)

Investigation of guide vane swirl and tumble device to improve in-cylinder air flow for compression ignition engine running with biodiesel
by: Saad I.; Bari S.
Published: (2015)

Synthesis of nanostructured calcite thin film by additive-free carbonation reaction via thermal chemical vapor deposition method
by: Sulimai N.H.; Salifairus M.J.; Khusaimi Z.; Malek M.F.; Abdullah S.; Khan H.; Al Rokayan S.; Rusop M.
Published: (2021)

Molecular engineering optimized carbon nitride photocatalyst for CO2 reduction to solar fuels
by: Hayat A.; Sohail M.; Iqbal W.; Taha T.A.; Alenad A.M.; Al-Sehemi A.G.; Ullah S.; Alghamdi N.A.; Alhadhrami A.; Ajmal Z.; Palamanit A.; Nawawi W.I.; AlSalem H.S.; Ali H.; Zada A.; Amin M.A.
Published: (2022)

Fabrication of high performance pvdf hollow fiber membrane using less toxic solvent at different additive loading and air gap
by: Zakria H.S.; Othman M.H.D.; Kadir S.H.S.A.; Kamaludin R.; Jilani A.; Omar M.F.; Bakar S.A.; Jaafar J.; Rahman M.A.; Abdullah H.; Puteh M.H.; Sinsamphanh O.; Ayub M.
Published: (2021)

CHEMICAL ENVIRONMENTS EFFECTS ON MECHANICAL PROPERTIES OF KENAF FIBRE REINFORCED PULVERISED FUEL ASH CONCRETE
by: Azzmi N.M.; Yatim J.M.; Jamaludin N.; Ahzahar N.; Zawawi Z.A.; Hashim S.Z.
Published: (2024)

The Effect of Palm Oil Fuel Ash (POFA) and Steel Fiber Addition to the Mechanical Properties of Ultra High Performance Concrete (UHPC)
by: Zakare H.; Alisibramulisi A.; Sidek M.N.M.; Newman A.; Saari N.; Adnan S.H.; Bhkari N.M.
Published: (2022)

Simulation of Optimizing Diesel-Ethanol-Palm Oil Methyl Ester Blends Combustibility in Direct Injection Diesel Engine
by: Taib N.M.; Mansor M.R.A.; Mahmood W.; Abdullah N.R.
Published: (2019)