Effect of Human Movement on Galvanic Intra-Body Communication during Single Gait Cycle

Intra-body communication (IBC) is a communication system that uses human body as a signal transmission medium. From previous research, two coupling methods of IBC were concluded which are capacitive coupling and galvanic coupling. This paper investigates the effect of human movement on IBC using the...

Full description

Bibliographic Details
Published in:IOP Conference Series: Materials Science and Engineering
Main Author: Ibrahim I.W.; Razak A.H.A.; Ahmad A.; Salleh M.K.M.
Format: Conference paper
Language:English
Published: Institute of Physics Publishing 2015
Online Access:https://www.scopus.com/inward/record.uri?eid=2-s2.0-84960844856&doi=10.1088%2f1757-899X%2f99%2f1%2f012027&partnerID=40&md5=443d355cee5ad37cabb3020bf74eafe2
Description
Summary:Intra-body communication (IBC) is a communication system that uses human body as a signal transmission medium. From previous research, two coupling methods of IBC were concluded which are capacitive coupling and galvanic coupling. This paper investigates the effect of human movement on IBC using the galvanic coupling method. Because the human movement is control by the limb joint, the knee flexion angle during gait cycle was used to examine the influence of human movement on galvanic coupling IBC. The gait cycle is a cycle of people walking that start from one foot touch the ground till that foot touch the ground again. Frequency range from 300 kHz to 200MHz was swept in order to investigate the signal transmission loss and the result was focused on operating frequency 70MHz to 90MHz. Results show that the transmission loss varies when the knee flexion angle increased. The highest loss of signal at frequency range between 70MHz to 90 MHz was 69dB when the knee flexion angle is 50° and the minimum loss was 51dB during the flexion angle is 5°. © Published under licence by IOP Publishing Ltd.
ISSN:17578981
DOI:10.1088/1757-899X/99/1/012027