Fourier analysis of conductive heat transfer for glazed roofing materials

• Published in: AIP Conference Proceedings
• Main Author: Roslan N.L.; Bahaman N.; Almanan R.N.R.; Ismail R.; Zakaria N.Z.
• Format: Conference paper
• Language: English
• Published: American Institute of Physics Inc. 2014
• Online Access: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84904630314&doi=10.1063%2f1.4887631&partnerID=40&md5=3a95dc9f35efd088bcb905d3aecda23d

For low-rise buildings, roof is the most exposed surface to solar radiation. The main mode of heat transfer from outdoor via the roof is conduction. The rate of heat transfer and the thermal impact is dependent on the thermophysical properties of roofing materials. Thus, it is important to analyze the heat distribution for the various types of roofing materials. The objectives of this paper are to obtain the Fourier series for the conductive heat transfer for two types of glazed roofing materials, namely polycarbonate and polyfilled, and also to determine the relationship between the ambient temperature and the conductive heat transfer for these materials. Ambient and surface temperature data were collected from an empirical field investigation in the campus of Universiti Teknologi MARA Shah Alam. The roofing materials were installed on free-standing structures in natural ventilation. Since the temperature data are generally periodic, Fourier series and numerical harmonic analysis are applied. Based on the 24-point harmonic analysis, the eleventh order harmonics is found to generate an adequate Fourier series expansion for both glazed roofing materials. In addition, there exists a linear relationship between the ambient temperature and the conductive heat transfer for both glazed roofing materials. Based on the gradient of the graphs, lower heat transfer is indicated through polyfilled. Thus polyfilled would have a lower thermal impact compared to polycarbonate. © 2014 AIP Publishing LLC.