Study on dimensional stability properties of laminated veneer lumber from oil palm trunk bonded with different cold set adhesives

QR Code

Study on dimensional stability properties of laminated veneer lumber from oil palm trunk bonded with different cold set adhesives

The study was conducted to determine the dimensional stability properties of Laminated Veneer Lumber (LVL) from Oil Palm Trunk (OPT) bonded with three different cold set adhesives namely Emulsion Polymer Isocyanate (EPI) and polyvinyl acetate (PVAc). Three-ply experimental LVL from OPT veneers were...

Full description

Bibliographic Details
Published in:	Journal of Applied Sciences
Main Author:	Sarmin S.-N.; Wan-Abd-Rahman W.-M.-N.; Kasim J.; Sulaiman O.; Hashim R.; Abdul-Hamid H.
Format:	Article
Language:	English
Published:	2013
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-84883821707&doi=10.3923%2fjas.2013.994.1003&partnerID=40&md5=08049a118af02462cdea916511c87829

Similar Items

Mechanical Properties of Laminated Veneer Lumber (LVL) Fabricated from Three Malaysian Hardwood Species
by: Bhkari N.M.; Chen L.W.; Nordin M.S.; Zainal N.S.; Za’ba N.I.L.; Ahmad Z.
Published: (2023)

Static bending properties of microwave modified oil palm trunk lumber
by: Saptri M.F.; Nordin K.; Jamaludin M.A.; Ahmad M.; Abdul Rahman N.A.
Published: (2014)

Resistance spot weld assisted with adhesive bonding
by: Ghazali F.A.; Zain N.M.; Salleh Z.; Taib Y.M.; Jumahat A.
Published: (2019)

SURVIVAL AND COMPLICATION RATES OF RESIN COMPOSITE LAMINATE VENEERS: A SYSTEMATIC REVIEW AND META-ANALYSIS
by: Lim, et al.
Published: (2023)

Veneers from Eucalyptus spp.
by: Muhammad Y.H.; Wan Abdul Rahman W.M.N.; Mohd Hassan N.H.; Ahmad N.; Mohammad N.A.; Sarmin S.N.; Antov P.
Published: (2023)

Strain Rate Effect on Mode I Debonding Characterization of Adhesively Bonded Aluminum Joints
by: Khan S.A.; Rahimian Koloor S.S.; King Jye W.; Yidris N.; Mohd Yusof A.A.; Mohd Szali Januddi M.A.F.; Tamin M.N.; Johar M.
Published: (2023)

The effect of pressing parameters and hardener content on the properties of plywood bonded with propylamine-UF adhesive
by: Kawalerczyk J.; Antov P.; Dziurka D.; Mirski R.; Lee S.H.
Published: (2024)

Performance of Particleboard Made of Agroforestry Residues Bonded with Thermosetting Adhesive Derived from Waste Styrofoam
by: Karliati T.; Lubis M.A.R.; Dungani R.; Maulani R.R.; Hadiyane A.; Rumidatul A.; Antov P.; Savov V.; Lee S.H.
Published: (2024)

Bending and bonding properties of mixed-species glued laminated timber from merpauh, jelutong and sesendok
by: Mohamad W.H.W.; Bhkari N.M.; Ahmad Z.
Published: (2019)

Enhancing the properties of date palm fibre reinforced bio-epoxy composites with chitosan – Synthesis, mechanical properties, and dimensional stability
by: Sarmin S.N.; Jawaid M.; Zaki S.A.; Radzi A.M.; Fouad H.; Khiari R.; Rahayu S.; Amini M.H.M.
Published: (2023)

Performance of Oriented Strand Board Bonded with a Hybrid Phenol-Formaldehyde/Polymeric Methylene Diphenyl Diisocyanate Adhesives System
by: Sari R.K.; Fitrianum F.; Kristak L.; Maulana M.I.; Antov P.; Hidayat W.; Iswanto A.H.; Lee S.H.; Lubis M.A.R.
Published: (2024)

Density and humidity gradients in veneers of oil palm stems
by: Choo A.C.Y.; Md. Tahir P.; Karimi A.; Bakar E.S.; Abdan K.; Ibrahim A.; Feng L.Y.
Published: (2011)

Effect of veneer treatment with phenol formaldehyde on physical and wetting properties of oil palm stem (Ops) plywood
by: Khalid H.; Ahmad Z.; Tahir P.Md.; Kasim J.
Published: (2021)

Pre-drying optimization of oil palm veneers by response surface methodology
by: Yong A.C.C.; Tahir P.M.; Karimi A.; Bakar E.S.; Abdan K.; Ibrahim A.; Halip J.A.
Published: (2015)

Veneer-Based products from eucalyptus spp.
by: Awang Othman A.F.; Ahmad Zaki J.; Rosman N.; Shafie A.; Abdul Latif N.H.; Abdullah Z.A.; Krišt'ák L.
Published: (2023)

Alteration in colour and fungal resistance of thermally treated oil palm trunk and rubberwood particleboard using palm oil
by: Lee S.H.; Zaidon A.; Rasdianah D.; Lum W.C.; Aisyah H.A.
Published: (2020)

OSC9: Colour Stability and Matching Accuracy of Custom Dual Laminated Composite Resin Shade Guide
by: Kassim M.Z.; Rahimi S.N.; Berhanuddin M.A.; Ghani S.M.A.; Lim T.W.
Published: (2018)

A preliminary study into the effect of oxide chemistry on the bonding mechanism of cold-sprayed titanium dioxide coatings on SUS316 stainless steel substrate
by: Omar N.I.B.; Mohamed S.B.; Yusuf Y.B.; Rahim T.B.A.; Mustafa Z.B.; Ismail S.B.; Bakar I.A.B.A.; Selvamani S.
Published: (2022)

Basis Set Effects on the Stabilities and Interaction Energies of Small Amide Molecules Adsorbed on Kaolinite Surface
by: Nabil N.-A.M.; Ang L.S.; Sulaiman S.
Published: (2023)

Imidazolium-Based Ionic Liquid Dissolution Influence on Crystallinity of Oil Palm Frond, Oil Palm Trunk and Elephant Grass Lignocellulosic Biomass
by: Che Kamarludin S.N.; Ubong S.; Idris N.; Azmi I.S.; Jainal M.S.; Jalil R.; Wan Omar W.S.A.; Zainal Mulok T.E.T.; Mohd Safaai N.S.; Azizan A.
Published: (2014)

Thermal Stability, Dynamic Mechanical Analysis and Flammability Properties of Woven Kenaf/Polyester-Reinforced Polylactic Acid Hybrid Laminated Composites
by: Azlin M.N.M.; Sapuan S.M.; Zuhri M.Y.M.; Zainudin E.S.; Ilyas R.A.
Published: (2022)

The role of antioxidants in improving biodiesel's oxidative stability, poor cold flow properties, and the effects of the duo on engine performance: A review
by: Amran N.A.; Bello U.; Hazwan Ruslan M.S.
Published: (2022)

The relationship between trunk rotation strength and throwing ball velocity among female collegiate softball players
by: Razak R.A.; Hussain R.N.J.R.; Kassim N.A.M.; Saleh M.M.; Isa K.A.; Razak F.
Published: (2022)

Study of Current and Voltage Stability as a Result of Inertia Settings in Wind Power Plants
by: Gumilar L.; Samat A.A.B.A.; Monika D.; Rumokoy S.N.; Cahyani D.E.
Published: (2023)

Adsorption of Cu, As, Pb and Zn by banana trunk; [Penjerapan Cu, As, Pb dan Zn oleh batang pisang]
by: Yasim N.S.E.M.; Ismail Z.S.; Zaki S.M.; Azis M.F.A.
Published: (2016)

Effects of different heat-induced setting methods on the structural stability and properties of 3D-printed surimi gels
by: Yang Z.; Lu K.; Zhao Y.; Shi X.; Mao W.; Zheng B.; Xu Y.; Gao P.; Zhou R.
Published: (2024)

Experimental-numerical analysis of woven laminates under tension
by: Zainal Abidin N.A.; Mohd Jailani M.Z.H.; Hussain A.K.; Mahmud J.
Published: (2020)

Cold Chain Management System via Low Power Wide Area Network and IoT
by: Soh Z.H.C.; Zamri L.B.M.; Sulaiman S.N.; Cheabdullah S.A.; Yahaya S.Z.; Ibrahim M.N.
Published: (2022)

Influence of chemical blends on palm oil methyl esters' cold flow properties and fuel characteristics
by: Ali O.M.; Yusaf T.; Mamat R.; Abdullah N.R.; Abdullah A.A.
Published: (2014)

Testing and analysis of cold-formed steel channel section with notch
by: Sani M.S.H.M.; Muftah F.; Ismail M.I.
Published: (2018)

Effect of surface pretreatment on water absorption and wet adhesion of organic coatings
by: Harun M.K.; Ismail S.N.A.S.; Lyon S.B.
Published: (2006)

Dynamic Interfacial Adhesion through Cucurbit[n]uril Molecular Recognition
by: Liu J.; Tan C.S.Y.; Scherman O.A.
Published: (2018)

Evaluating the Structural Response of Ceramic-Metal Laminate under Ballistic Impact
by: Meon M.S.; Delfrin M.Q.; Saedon J.
Published: (2024)

Experimental investigation on box-up cold-formed steel columns in fire
by: Muftah F.; Sani M.S.H.M.; Osman A.R.; Mohammad S.; Ngian S.P.
Published: (2018)

Natural Frequencies Optimisation of Hybrid Composite Laminates using Response Surface Method
by: Rosaidi M.H.M.; Mahmud J.; Rahman S.M.A.; Halim N.H.A.; Abdullah R.I.R.; Patar M.N.A.A.
Published: (2023)

Modernization, Malay matrimonial foodways and the community social bonding
by: Mohd Zahari M.S.; Kamaruddin M.S.Y.; Muhammad R.; Kutut M.Z.
Published: (2011)

Effects of Compression Ratio and Phenolic Resin Concentration on the Properties of Laminated Compreg Inner Oil Palm and Sesenduk Wood Composites
by: Ahamad W.N.; Salim S.; Lee S.H.; Abdul Ghani M.A.; Mohd Ali R.A.; Md Tahir P.; Fatriasari W.; Antov P.; Lubis M.A.R.
Published: (2023)

Numerical investigation of cold-formed steel channel columns subjected to axial thrust
by: Zain M.R.M.; Wee L.S.; Rosli M.I.F.; Hamid H.A.
Published: (2010)

Assessment on ultimate load of Cold-formed steel channel (CFSC) stub column
by: Sani M.S.H.M.; Muftah F.; Muda M.F.; Tan C.S.
Published: (2015)

Management of COVID-19 vaccines cold chain logistics: a scoping review
by: Fahrni M.L.; Ismail I.A.-N.; Refi D.M.; Almeman A.; Yaakob N.C.; Saman K.M.; Mansor N.F.; Noordin N.; Babar Z.-U.-D.
Published: (2022)