The effect of zinc to aluminium molar ratio on the physico-chemical properties of Zinc-Aluminium-3,4-Dichlorophenoxy Acetate nanocomposite

QR Code

The effect of zinc to aluminium molar ratio on the physico-chemical properties of Zinc-Aluminium-3,4-Dichlorophenoxy Acetate nanocomposite

Layered double hydroxide (LDH) hybrid materials of Zn-Al-layered double hydroxide-3,4-dichlorophenoxy acetate acidnanocomposites (ZADs) were prepared by direct self-assembly method. The pH of the solution was adjusted to 7.5 using 2M NaOH. Various Zn2+ to Al3+ molar ratios, R ranging from 1 to 6 wer...

Full description

Bibliographic Details
Published in:	Materials Science Forum
Main Author:	Ghazali S.A.I.S.M.; Hussein M.; Sarijo S.H.
Format:	Conference paper
Language:	English
Published:	Trans Tech Publications Ltd 2013
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-84878505564&doi=10.4028%2fwww.scientific.net%2fMSF.756.127&partnerID=40&md5=0bb16f274e8919400c5ca78b67844ef4

Similar Items

Synthesis and Physico-Chemical Properties of Zinc Layered Hydroxide-4-Chloro-2-Methylphenoxy Acetic Acid (ZMCPA) Nanocomposite
by: Salleh N.M.; Mohsin S.M.N.; Sarijo S.H.; Ghazali S.A.I.S.M.
Published: (2017)

Formation of zinc-aluminium layered double hydroxide-2,4,5- tricholorophenoxybutyrate nanocomposites by ion exchange method
by: Ghazali S.A.I.S.M.; Hussein M.Z.; Yahaya Subban R.H.; Sarijo S.H.
Published: (2014)

Synthesis, characterization and controlled release properties of zinc–aluminium-beta-naphthoxyacetate nanocomposite
by: Jubri Z.; Yusoff N.Z.A.M.; Sarijo S.H.; Marsom E.S.; Hussein M.Z.
Published: (2017)

Synthesis, characterization and sustained release properties of zinc-aluminium-9-hydroxy-9-flourenecarboxylate nanocomposite
by: Sarijo S.H.; Ahmad A.; Jubri Z.
Published: (2012)

Intercalations and characterization of zinc/aluminium layered double hydroxide-cinnamic acid
by: Adam N.; Mohd Ghazali S.A.I.S.; Dzulkifli N.N.; Hak C.R.C.; Sarijo S.H.
Published: (2019)

Characterization, physiochemical, controlled release studies of zinc–aluminium layered double hydroxide and zinc layered hydroxide intercalated with salicylic acid
by: Adam N.; Sheikh Mohd Ghazali S.A.I.; Dzulkifli N.N.; Hak C.R.C.
Published: (2021)

Performance of ultraviolet photoconductive sensor based on aluminium-doped zinc oxide nanorod-nanoflake network thin film using aluminium contacts
by: Mamat M.H.; Md Sin N.D.; Saurdi I.; Hafizah N.N.; Malek M.F.; Asiah M.N.; Khusaimi Z.; Habibah Z.; Nafarizal N.; Rusop M.
Published: (2014)

Physico-chemical properties of zinc partially substituted magnetite nanoparticles
by: Zubir N.A.; Da Costa J.C.D.; Yacou C.; Motuzas J.; Zhang X.
Published: (2016)

Gold-Catalyzed Growth of Aluminium-Doped Zinc Oxide Nanorods by Sputtering Method
by: Rosli A.B.; Marbie M.M.; Herman S.H.; Ani M.H.
Published: (2014)

Synthesis and characterisation of nanohybrid anti-hypertensive drug, captopril intercalated into zinc-aluminium layered double hydroxide; [Sintesis dan pencirian nanohibrid ubat anti-hipertensi, captopril tersisip ke dalam zink-aluminium hidroksida berlapis ganda]
by: Zaemah J.; Sarijo S.H.; Jadam M.L.A.
Published: (2019)

Physicochemical study of 3,4-dichlorophenoxyacetic acid intercalated into hydrotalcite-like compound by ion exchanged method
by: Ghazali S.A.I.S.M.; Sarijo S.H.; Hussein M.Z.
Published: (2016)

3,4-dichlorophenoxyacetate interleaved into anionic clay for controlled release formulation of a new environmentally friendly agrochemical
by: Ghazali S.A.I.S.M.; Hussein M.Z.; Sarijo S.H.
Published: (2013)

Investigation of stress and electrical properties of air-annealed and oxygen-annealed aluminium-doped zinc oxide nanorod arrays
by: Mamat M.H.; Md Sin N.D.; Saurdi I.; Hafizah N.N.; Malek M.F.; Asiah M.N.; Khusaimi Z.; Habibah Z.; Nafarizal N.; Rusop M.
Published: (2014)

Physicochemical characterization and controlled release formulation on intercalated 2-methyl-4-chlorophenoxy acetic acid-graphite oxide (MCPA-GO) nanocomposite
by: Hasanuddin N.I.; Dzulkifli N.N.; Sarijo S.H.; Ghazali S.A.I.S.M.
Published: (2020)

Effects of annealing environments on the solution-grown, aligned aluminium-doped zinc oxide nanorod-array-based ultraviolet photoconductive sensor
by: Mamat M.H.; Che Khalin M.I.; Nik Mohammad N.N.H.; Khusaimi Z.; Md Sin N.D.; Shariffudin S.S.; Mohamed Zahidi M.; Mahmood M.R.
Published: (2012)

Interleaving of 2,4-Dichlorophenoxyacetate Acid into Calcium-Aluminium-Layered Double Hydroxide by Comparison of Co-Precipitation and Ion Exchange Methods
by: Hayazi F.H.M.; Adam N.; Dzulkifli N.N.; Hamzah M.A.K.M.; Jadam M.L.; Sarijo S.H.; Ghazali S.A.I.S.M.
Published: (2020)

Fabrication of an ultraviolet photoconductive sensor using novel nanostructured, nanohole-enhanced, aligned aluminium-doped zinc oxide nanorod arrays at low immersion times
by: Mamat M.H.; Malek M.F.; Hafizah N.N.; Khusaimi Z.; Musa M.Z.; Rusop M.
Published: (2014)

Ultraviolet sensing mechanism and characteristics of environmentally friendly aligned aluminium doped zinc oxide nanorod arrays prepared using low cost solution growth method
by: Mamat M.H.; Musa M.Z.; Malek M.F.; Rusop M.; Khusaimi Z.
Published: (2011)

Structural and Electrochemical Behaviors of ZnO Structure: Effect of Different Zinc Precursor Molarity
by: Mohamed R.; Anuar M.S.A.
Published: (2022)

Heat conductivity and permeability of aluminium foam
by: Khalid A.H.; Ismail M.H.; Abu Kasim H.B.; Pahroraji H.F.; Bin Zainol M.A.; Mohd Azaiauddin A.M.B.
Published: (2020)

Structural and Optical Properties of ZnO-TiO2 Nanocomposite Synthesized with Various Molar Ratios by Hydrothermal Technique
by: Nor A.M.; Malek M.F.; Mohamed R.; Mahmood M.R.
Published: (2022)

Synthesis, Characterization, and Control Release of Zinc Layered Nitrate Intercalated with Beta-Napthoxyacetic Acid (BNOA) Nanocomposite
by: Abd Rahim H.F.; Jalil M.N.; Buyong F.; Sarijo S.H.; Zaki H.M.
Published: (2024)

SYNTHESIS AND CHARACTERIZATION OF 4-CHLOROPHENOXYACETIC ACID HERBICIDE INTERCALATED INTO CALCIUM-ALUMINIUM LAYERED DOUBLE HYDROXIDE THROUGH CO-PRECIPITATION METHOD; [Sintesis dan Pencirian Herbisid Asid 4-Klorofenoksiasetik Diinterkalatkan dengan Kalsium-Aluminium Hidroksida Dua Lapisan Melalui Kaedah Pemendakan Bersama]
by: Bohari F.L.; Hamzah M.A.K.M.; Ghazali S.A.I.S.M.; Dzulkifli N.N.; Fatimah I.; Adam N.
Published: (2021)

Fabrication of ultraviolet photoconductive sensor using a novel aluminium-doped zinc oxide nanorod-nanoflake network thin film prepared via ultrasonic-assisted sol-gel and immersion methods
by: Mamat M.H.; Khusaimi Z.; Musa M.Z.; Malek M.F.; Rusop M.
Published: (2011)

Synthesis of nanocomposite 2-methyl-4-chlorophenoxyacetic acid with layered double hydroxide: Physicochemical characterization and controlled release properties
by: Sarijo S.H.; Ghazali S.A.I.S.M.; Hussein M.Z.; Sidek N.J.
Published: (2013)

Design and fabrication of aluminium foam tube for heat exchanger application
by: Lias I.; Nasir M.I.; Ismail M.H.; Mamat A.M.I.
Published: (2016)

Ni(II) Butylmethyldithiocarbamate: Physico-Chemical Properties, X-Ray Crystallography, DFT and Anti-Corrosion Screening in Different Acids
by: Othman N.F.H.; Latif N.S.H.; Ghazali S.A.I.S.M.; Abdullah E.N.; Dzulkifli N.N.
Published: (2021)

Nucleation and nonisothermal crystallization kinetics in cross-linked polyethylene/zinc oxide nanocomposites
by: Jose J.P.; Chazeau L.; Cavaillé J.-Y.; Varughese K.T.; Thomas S.
Published: (2014)

Synthesis and Characterization of 2,4-Dichlorophenoxypropanoic Acid (2,4-DP) Herbicide Interleaved into Calcium-Aluminium Layered Double Hydroxide and the Study of Controlled Release Formulation
by: Bohari F.L.; Noor N.A.M.; Ghazali S.A.I.S.M.; Dzulkifli N.N.; Fatimah I.; Adam N.
Published: (2022)

Synthesis of a layered organic-inorganic nanohybrid of 4- chlorophenoxyacetate-zinc-layered hydroxide with sustained release properties
by: Hussein M.Z.; Nazarudin N.F.B.; Sarijo S.H.; Yarmo M.A.
Published: (2012)

Mechanical evaluation and thermal modelling of friction welding of mild steel and aluminium
by: Seli H.; Ismail A.I.Md.; Rachman E.; Ahmad Z.A.
Published: (2010)

Effect of dual flocculant by unmodified manihot esculenta starch and aluminium sulphate on the removal of chemical oxygen demand optimized by response surface methodology
by: Rahmat S.; Othman N.; Ahmad S.N.; Asharuddin S.M.
Published: (2024)

Influence of Zinc Acetate Concentration on ZnO Growth on Anodized Nb2O5 Nanoporous Films and Photocatalytic Dye Degradation
by: Abdul Rani R.; Jamil N.S.; Fadzilah Suhaimi M.H.; Zoolfakar A.S.; Khusaimi Z.; Mahmood M.R.
Published: (2023)

Physico-mechanical properties of geopolymer mortars for repair applications: Impact of binder to sand ratio
by: Zailani, et al.
Published: (2024)

Physico-mechanical properties of geopolymer mortars for repair applications: Impact of binder to sand ratio
by: Zailani W.W.A.; Apandi N.M.; Adesina A.; Alengaram U.J.; Faris M.A.; Tahir M.F.M.
Published: (2024)

Investigation of the dynamic characteristics of an aluminium honeycomb sandwich panel using MSC Nastran
by: Shah M.A.S.A.; Rani M.N.A.; Mirza W.I.I.W.I.; Yunus M.A.; Oktavc A.; Peter C.
Published: (2022)

A Review: Characterization Of Aluminium-Metal Matrix Composite Reinforced with Zirconium Diboride
by: Suhaimi M.A.; Mahat M.M.; Yahaya S.M.; Ramli R.
Published: (2024)

Optimization of Machining Parameters for Product Quality and Productivity in CNC Machining of Aluminium Alloy
by: Armansyah; Nasution S.R.; Dewanto N.D.; Sudianto A.; Saedon J.; Adenan S.
Published: (2024)

Fabrication of Uniform Aluminium Nitrate Thin Film on 2-inch Silicon Substrate
by: Abdullah S.A.B.; Abd Aziz N.S.B.; Mamat M.H.; Azman Z.; Sahari N.; Mohamed A.N.; Wijaya Y.P.; Nayan N.
Published: (2023)

Fabrication of vertically aligned carbon nanotubes-zinc oxide nanocomposites and their field electron emission enhancement
by: Suriani A.B.; Dalila A.R.; Mohamed A.; Mamat M.H.; Malek M.F.; Soga T.; Tanemura M.
Published: (2016)