Effects of annealing environments on the solution-grown, aligned aluminium-doped zinc oxide nanorod-array-based ultraviolet photoconductive sensor

We have fabricated metal-semiconductor-metal- (MSM-) type ultraviolet (UV) photoconductive sensors using aluminium- (Al-) doped zinc oxide (ZnO) nanorod arrays that were annealed in different environments: air, oxygen, or a vacuum. The Al-doped ZnO nanorods had an average diameter of 60 nm with a th...

Full description

Bibliographic Details
Published in:Journal of Nanomaterials
Main Author: Mamat M.H.; Che Khalin M.I.; Nik Mohammad N.N.H.; Khusaimi Z.; Md Sin N.D.; Shariffudin S.S.; Mohamed Zahidi M.; Mahmood M.R.
Format: Article
Language:English
Published: 2012
Online Access:https://www.scopus.com/inward/record.uri?eid=2-s2.0-84867877106&doi=10.1155%2f2012%2f189279&partnerID=40&md5=652e76f2f5381dfca278a55053289c5f
Description
Summary:We have fabricated metal-semiconductor-metal- (MSM-) type ultraviolet (UV) photoconductive sensors using aluminium- (Al-) doped zinc oxide (ZnO) nanorod arrays that were annealed in different environments: air, oxygen, or a vacuum. The Al-doped ZnO nanorods had an average diameter of 60 nm with a thickness of approximately 600 nm that included the seed layer (with thickness ∼200 nm). Our results show that the vacuum-annealed nanorod-array-based UV photoconductive sensor has the highest photocurrent value of 2.43 × 10-4 A. The high photocurrent is due to the high concentration of zinc (Zn) interstitials in the vacuum-annealed nanorod arrays. In contrast, the oxygen-annealing process applied to the Al-doped ZnO nanorod arrays produced highly sensitive UV photoconductive sensors, in which the sensitivity reached 55.6, due to the surface properties of the oxygen-annealed nanorods, which have a higher affinity for oxygen adsorption than the other samples and were thereby capable of reducing the sensor's dark current. In addition, the sensor fabricated using the oxygen-annealed nanorod arrays had the lowest rise and decay time constants. Our result shows that the annealing environment greatly affects the surface condition and properties of the Al-doped ZnO nanorod arrays, which influences the performance of the UV photoconductive sensors. © 2012 Mohamad Hafiz Mamat et al.
ISSN:16874129
DOI:10.1155/2012/189279