| Summary: | A 1 kWp 'stand alone' PV system consists of 4 module (2 BP SX75U module and 2 BP 275F module), inverter, 2 thermocouple, 3 voltage sensor, 3 current sensor,4 battery and data logger (Data Taker DT80) has been set up. This research involve nine parameters which are irradiance (I a), ambient temperature (Tamb), module temperature (T mod), module voltage (Vmod), battery voltage (V bat), load voltage (Vload), module current (I mod), battery current (Ibat) and load current (I load). All parameters were measured using the equipments and sensors that connected directly to data logger (Data Taker DT80) to interpret and show the data on computer using the Delogger sofware. The data then was transferred into the computer and analyzed using the Deview and Microsoft Excel software to determine the performance indices for the stand alone PV system. From the analysis a few performance indices were determined. The range of daily solar irradiation is between 2.20 kWhm-2 to 4.00 kWhm-2, while the range of total global irradiation is between 5.76 kWh to 10.48 kWh. For daily total energy yield, the range is between 0.23 kWh d-1 to 0.28 kWh d-1. The range for clearness index is between 0.49% to 0.89%. The range for final yield is between 0.77 kWh d-1 kWp - 1 to 0.93 kWh d-1 kWp -1 while the range of array efficiency is between 2.53% to 4.65%. Lastly, the range of the performance ratio is between 22.08% to 40.58%. © 2009 American Institute of Physics.
|
|---|